欢迎进入一品仪器设备有限公司网站!
一品仪器 - 贝博betball登录官网-ballbet贝博在线-贝博游戏平台官网
yipin instrument-Products
4贝博betball登录官网-ballbet贝博在线-贝博游戏平台官网

Table 3 The actual temperature measurement and humidity value table of each space intermediate temperature detection point


​Table 3 The actual temperature measurement and humidity value table of each space intermediate temperature detection point

​Temperature setting: 85 °C Indication: 84.7 °C ~ 85.2 °C

Humidity setting (2) 85 %RH indication: 83.3%RH ~86.4%RH(B)

Detection point location

Measured value

Upper deviation

Lower deviation

 

Detection point location

Measured value

Upper deviation

Lower deviation

upper  layer

A

84.9

0.0

-0.1

 

When 85%RH

A

+1.2

-1.2

B

84.9

0.0

-0.1

 

 

C

85.1

+0.1

0.0

 

 

 

 

 

 

Description:

The measured value is the median of 15 consecutive measurements.

The upper deviation is the highest value of 15 data

The lower deviation is the lowest value of 15 data

The test point concludes:

Temperature uniformity: ±2 °C

Humidity fluctuation: ±5% RH

Temperature fluctuation: ± 0.3 °C

D

85.2

+0.2

0.0

Middle  layer

O

84.9

0.0

-0.1

Lower layer

E

84.8

0.0

-0.3

F

84.8

0.0

-0.3

G

84.8

0.0

-0.2

H

84.7

0.0

-0.3

Overall conclusion:

The main technical indicators of the temperature equipment meet the corresponding technical requirements, meet the factory technical standards, and are allowed to leave the factory.

 

Additional information:

1. When the measuring body is in the air, the machine is running normally under no-load condition.

贝博betball登录官网-ballbet贝博在线-贝博游戏平台官网2. The position of each temperature detection point, the upper test point is 10cm away from the top wall, the lower test point is 10cm away from the bottom wall, the upper and lower points are 10cm away from the box wall, the center point, and the humidity measurement point is the geometric center point of the box work space.

3. Each test point is the highest temperature point of the equipment, the intermediate temperature point and the lowest temperature point for performance testing. The humidity measurement is the humidity of the intermediate temperature.

4. The above measured data is the data measured after the temperature reaches the set value for the first time and stabilized for 30 minutes, and is recorded continuously for 15 times. That is, it is measured once every 2 minutes, and 15 times are me

[返回]   
下一篇:Test Results
Copyright © 2017 东莞市一品仪器设备有限公司 版权所有 本站素材及相关资源均来源互联网,如有侵权请速告知,我们将会在24小时内删除*【Gmap】 访问量: 【】
服务热线
0769-84393814
产品符合ISO、ASTM、DIN、EN、GB、BS、JIS、ANSI、UL、等国际测试标准
专注试验设备多年
关闭
在线咨询

技术咨询